I feel like I've written this too many times, but here we go again.
There was a splendid article in the New York times today concerning Bayesian statistics, except that, as usual, it had some errors.
Lest you think me overly pedantic, I will note that Andrew Gelman, the Columbia professor profiled in much of the article, has already posted his own blog entry highlighting a bunch of the errors (including the one I focus on) here.
Concerning p-values the article states:
"accepting everything with a p-value of 5 percent means that one in 20 “statistically significant” results are nothing but random noise." This is nonsense. I found this nonsense particularly interesting because I recently read almost the same line in a work written by an MIT professor.
P-value explained in brief
Before I get to explaining why the Times is wrong, I need to explain what a p-value is. A p-value is a probability calculation, first of all. Second of all, it has an inherent assumption behind it (technically speaking, it is a conditional probability calculation). Thus, it calculates a probability assuming a certain state of the world. If that state of the world does not exist, then the probability is inapplicable.
An example: I declare:"The probability you will drown if you fall into water is 99%." "Not true," you say, "I am a great swimmer." "I forgot to mention," I explain, "that you fall from a boat, which continues without you to the nearest land 25 miles away...and the water is 40 degrees." The p-value is a probability like that -- it is totally rigged.
The assumption behind the p-value is often called a Null Hypothesis. The p-value is the chance of obtaining your particular favorable research result, under the "Null Hypothesis" assumption that the research is garbage. It is the chances that, given your research is useless, you obtained a result at least as positive as the one you did. But, you say, "my research may not be totally useless!" The p-value doesn't care about that one bit.
More detail using an SAT prep course example
Suppose we are trying to determine whether an SAT prep course results in a better score for the SAT. The Null Hypothesis would be characterized as follows:
H0=Average Change in Score after course is 0 points or even negative. In shorthand, we could call the average change in score D (for difference) and say H0: D<=0. Of course, we are hoping the test results in a higher score, so there is also a research hypothesis: D>=0. For the purposes of this example, we will assume the change that occurs is wholly due to the course and not to other factors, such as the students becoming more mature with or without the course, the later test being easier, etc.
Now suppose we have an experiment where we randomly selected 100 students who took the SAT and gave them the course before they re-took the exam. We measure each students change and thus calculate the average d for the sample (I am using a small d to denote the sample average while the large D is the average if we were to measure it across the universe of all students who ever existed or will exist). Suppose that this average for the 100 students is an score increase of 40 points. We would like to know, given the average difference, d, in the sample, is the universe average D greater than 0? Classical statistics neither tells us the answer to this question nor does it even give the probability that the answer to this question is "yes."
Instead, classical statistics allows us only to calculate the p-value: P(d>=40| D<=0). In words, the p-value for this example is the probability that the average difference in our sample is 40 or more, given that the Universe average difference is 0 or less (Null Hypothesis is true). If this probability is less than 5%, we usually conclude the Null Hypothesis is FALSE, and if the NUll Hypothesis were in fact true, we would be incorrectly concluding statistical significance. This incorrect conclusion is often called a false positive. The chance of a false positive can be written in shorthand as P(FP|H0), where FP is false positive, "|" means given, and H0 means Null hypothesis. (Technically, but not important here, we calculate the probability at D=0 even though the Null Hypothesis covers values less than zero, because that gives the highest (most conservative) value.) If the p-value is set at 5% for statistical significance, that means P(FP|H0)=5%.
A more general way of defining the p-value is that the p-value is the chance of obtaining a result at least as extreme as our sample result under the condition/assumption that the Null Hypothesis is true. If the Null Hypothesis is false (in our example if the universe difference is more than 0), the p-value is meaningless.
So why do we even use the p-value? The idea is that if the p-value is extremely small, it indicates that our underlying Null Hypothesis is false. In fact, it says either we got really lucky or we were just assuming the wrong thing. Thus, if it is low enough, we assume we couldn't have been that lucky and instead decide that the Null Hypothesis must have been false. BINGO--we then have a statistically significant result.
If we set the level for statistical significance at 5% (sometimes it is set at 1% or 10%), p-values at or below 5% result in rejection of the Null Hypothesis and a declaration of a statistically significant difference. This mode of analysis leads to four possibilities:
False Positive (FP), False Negative (FN), True Positive (TP), and True Negative(TN).
False Positives occur when the research is useless but we nonetheless get a result that leads us to conclude it is useful.
False Negatives occur when the research is useful but we nonetheless get a result that leads us to conclude that it is useless.
True Positive occur when the research is useful and we get a result that leads us to conclude that it is useful.
True Negatives occur when the research is useless and we get a result that leads us to conclude that it is useless.
We only know if the result was positive (statistically significant) or negative (not statistically significant)--we never know if the result was TRUE (correct) or FALSE (incorrect). The p-value limits the *chance* of a false positive to 5%. It does not explicitly deal with FN, TP, or TN.
Back to the Question of how many published studies are garbage, but it gets a little technical
Now, back to the quote in the article: "accepting everything with a p-value of 5 percent means that one in 20 “statistically significant” results are nothing but random noise."
Let's consider a journal that publishes 100 statistically significant results regarding SAT courses that improve scores and statistical significance is based on p-values of 5% or below. In other words, this journal published 100 articles with research showing that 100 different courses were helpful. What number of these courses actually are helpful?
Given what we have just learned about the p-value, I hope your answer is 'we have no idea.' There is no way to answer this question without more information. It may be that all 100 courses are helpful and it may be that none of them are. Why? Because we do not know if these are all FPs or all TPs or something in-between--we only know that they are positive, statistically significant results.
To figure out the breakdown, let's do some math. First, create an equation, using some of the terminology from earlier in the post.
The Number of statistically significant results = False positives (FP) plus True positives (TP). This is simple enough
We can go one step further and define the probability of a false positive given the Null hypothesis is true and the probability of a true positive given the alternative hypothesis is true -- P(FP|H0) and P(TP|HA). We know that P(FP|H0) is 5% -- we set this is by only considering a result statistically significant when the p-value is 5%. However, we do not know P(TP|HA), the chances of getting a true positive when the alternative hypothesis is true. The absolute best case scenario is that it is 100%--that is, any time a course is useful, we get a statistically significant result.
Suppose that we know that B% of courses are bad and (1-B)% of courses are helpful. Bad courses do not improve scores and helpful courses do. Further, let's suppose that N courses in total were considered, in order to get the 100 with statistically significant results. In other words, a total of N studies were performed on courses and those with statistically significant results were published by the journal. Let's further assume the extreme concept above that ALL good courses will be found to be good (no False Negatives), so that P(TP|HA)=100%. Now we have the components to figure out how many bad courses are among the 100 publications regarding helpful courses.
The number of statistically significant results is :
100= B*N*P(FP|H0) + (1-B)*N*P(TP|HA)
This first term just multiplies the (unknown) percent of courses that are bad by the total studies performed by the percent of studies that will give the false positive result that says the course is good. The second term is analogous, but for good courses that achieve true positive results. These reduce to:
100 = N(B*5% + (1-B)*100%) [because the FP chances are 5% and TP chances are 100% ]
= N(.05B +1 - B) [algebra]
= N(1-.95B) [more algebra]
==> B = (20/19)*(1- 100/N) [more algebra]
The published courses equal B*N*P(FP|H0), which in turn equals (1/19)*(N-100) [using more algebra].
If you skipped the algebra, what this comes down to is that the number of bad courses published depends on N, the total number of different courses that were researched.
If N were 100, then 0 of the publications were garbage and all 100 were useful.
If the N were 1,000, then about 947 were garbage, about 47 of which were FPs and thus among the 100 publications. So 47 garbage courses were among the 100 published.
If the total courses reviewed were 500, then about 421 were garbage, about 21 which were FPs and thus among the 100 publications.
You might notice, that given our assumptions, N cannot be below 100, the point at which no studies published are garbage.
Also, N cannot be above 2000, the point at which all studies published are garbage.
You might be thinking--we have no idea how many studies are done for each journal article accepted for publication though, and thus knowing that 100 studies are published tells us nothing about how many are garbage--it could be anything from 0 to 100% of all studies! Correct. We need more information to crack this problem. However, 5% garbage may not be so terrible anyway.
While it might seem obvious that 0 FPs is the goal, such a stringent goal, even if possible, would almost certainly lead to many more FNs, meaning good and important research would be ignored because its statistical significance did not meet a more stringent standard. In other words, if standards were raised to 1% or 0.1%, then some TPs under the 5% standard would become FNs under the more stringent standard, important research--thought to be garbage--would be ignored, and scientific progress would be delayed.